Glock Talk

You asked for it? You Got it! Ballistics Gel Testing Videos.

GunRunnerZ YouTube — Tue, 21 May 2013 06:22:16 GMT

I finally finished the video from this past weekend's ballistics gel testing. We had a blast and even though it was our first test we think it was quite successful. We have two videos for you guys today.

Melee Weapons:

YouTube (Short URL)

RBCD Performance Plus 60g 357 Magnum:

http://youtu.be/r-q48Ryj10Q

Let us know what you guys think. It was our first test so we learned a few lessons and are always trying to improve. :cool:

I'm bored, I want a XDs that takes 1911 mags

seamaster — Tue, 21 May 2013 06:18:13 GMT

I know I'm dreaming but someone has to. How cool would it be if they stretched the grip to take full size 1911 mags and what the heck, lets give it a 5" barrel. Would you buy one?

Some pictures out of Oklahoma

The Maggy — Tue, 21 May 2013 05:21:24 GMT

As my friends are slowly making their way back to the internet, they have begun uploading some pictures from their neighborhoods. Some people were asking what the big deal was so I figured I would share for those that have never seen what a storm like this does.

New EDC Birthday Present...

BAB 78 — Tue, 21 May 2013 04:45:28 GMT

Sorry for the huge Picture. Didn't know how to make it smaller. This is my birthday present from my wife and my new EDC knife. It is also my first Benchmade knife. Its the H&K Conspiracy. Before this my EDC was a Ka-Bar TDI. I liked the TDI but a couple months ago like an idiot I let my CCW license expire by accident. And all I had to carry for about two months was just the TDI. So I got to thinking if I got into a jam and needed to defend myself it would probably be difficult to take down a BG with such a small blade. So the reason for the purchase of my new Benchmade.
The knife is a little heavier than I thought. Its a thick, heavy well built knife. I bought a Tek-Lok clip to use with it but apparently it doesn't fit on this sheath which sucked. It comes with a plastic belt loop which I'm using but it moves around a little bit when I'm carrying it. Its not too bad, I'll just have to get used to it. So far I'm impressed with the knife. Its very well built. I'm sure there will be more Benchmades to come in the future.

What you see when you step out of your shelter after massive tornado.

Gonetodarkside — Tue, 21 May 2013 04:23:35 GMT

LiveLeak.com - Family comes out of storm cellar after tornado

yup, it is time for a shelter for the fam.

Pearce +2 Baseplate

atlboy89 — Tue, 21 May 2013 03:55:28 GMT

Hey guys. Went and picked up a Pearce +2 baseplate today for my G19. Installation was easy, but for the life of me I cant get 2 extra rounds in my mag, only one. Now I bought the Pearce +2 baseplate for the Gen3 model, as my G19 is a Gen3, but I read online that if your mags have the double notches in them like the Gen4 mags then the Pearce +2 baseplate (Gen3 model) will only add one round and that I needed the Gen4 Pearce +2 baseplate. Note: I have a new G19 Gen3 that is only a few months old and it came with the double notched mags. Has anyone else had this problem, or tried the Gen4 version of the Pearce Baseplate on a new Gen3? Thanks guys.

My 2nd grader is getting good at soccer

ithaca_deerslayer — Tue, 21 May 2013 03:43:04 GMT

I was good in HS, not World Cup material, but a starter.

Teaching the boy. Been teaching him since he was a toddler. But also skiing and horseback riding and bicycles and baseball. All that stuff.

But he's recently taken more of an interest in soccer. Even while he's currently on a little league baseball team. Every evening he has me out in the back yard.

Got him signed up for a local town soccer league for this Summer. Plus some fellow Cub Scout dad has asked me if I want to join his over 30 team this Summer. I qualify for over 40, but the other dads aren't as old.

So I took the boy out shopping for cleats and shin pads and socks for the both of us. We've been suited up each evening, playing half field 1 on 1, open goal. Or taking turns as goalie.

I am beat. Out of shape. And he is learning quickly. I'm not playing rough with him. If I did, I'd have the huge unfair advantage. I was center full and center half in the olden days, so I've dropped a few guys on the field with legal tackles. But leaving that out of the mix, and not trying to over power the ball through him, and instead playing clean, it is tough to keep up with him.

It just happened suddenly, this Spring, stuff just started to click with his playing technique. He's keeping the ball in tight on his dribbles, and changing direction good, and using acceleration when he breaks past me. He's also picking the ball from my feet, and when defending keeping his position between me and the goal.

Don't get me wrong, I'm not saying he's the best at his age in the world. I'm just happy that at this rate he'll get a couple years starting varsity when he reaches HS. I hope he gets that experience. The friends, the sport, the girls, you know, all that good stuff. Along with the academics.

But right now, the only thing that saves me from being completely bested by him is his attention span. After a half hour he's ready to go play on the playground or get a squirt gun out. And I'm about doubled over and huffing.

___________
I joined the NRA, have you yet?

Can anyone help me ID or price this old bolt-action rifle?

Kevin108 — Tue, 21 May 2013 03:39:49 GMT

Supposedly it's a WWI 8mm. I found multiple numbers on it but knowing nothing about it, I didn't know which were relevant. The pics are in florescent light so they're not the best.

A family member is needing cash and wants to sell it but doesn't know what it's worth. Can any of you help me out?

"New" .38 Special

Tiro Fijo — Tue, 21 May 2013 03:24:51 GMT

Remington is "reintroducing" their old standby FBI load but in plain brass cases and for a lot less money:

http://www.midwayusa.com/product/598...oint-box-of-50

Written Consent Forms

cowboywannabe — Tue, 21 May 2013 03:12:51 GMT

can any of you guys (PM if needed) copy and paste your department's written consent form?

The ones you would use for getting written consent from a mom to search her house because lil'jimmy (14 years old) is suppose to have a gun, has talked about it at school and on his face book page he flashes signs and boast about being in a gang....

i need a template for such a thing. (not one for doing a roadside vehicle search for dope).

thanks.

Carbine class, A2 rifle, & cross-eye dominance

GAFinch — Tue, 21 May 2013 03:08:32 GMT

I would like to take a professional training class (or two), as a civilian, but keep seeing recommendations for a gun with an optic. I have long arms and love the feel of my (A2) 20" AR, with a mid-length being passable, but I really dislike carbine-length guns. Is an optic a realistic, useful upgrade for someone who's right-handed/left-eye dominant and, if so, is it feasible for a rifle with a carry handle? If not, which optic would be best on a new mid-length/A4 build? If I'm not uber-competitive and just trying to simply be useful in a SHTF situation...am I better off just making the most of what I already have?

God Has a Sense of Humor

GlockPistola — Tue, 21 May 2013 03:00:29 GMT

Today's Short Reading from the Bible... from Genesis: "And God promised men that good and obedient wives would be found in all corners of the earth."

Then he made the earth round...................and he laughed and laughed and laughed!

Question for competition rifle shooters

pesticidal — Tue, 21 May 2013 02:44:43 GMT

We're in the process of drawing up plans for an indoor, underground rifle range. We have room to build to 100 meters, but going to 100 yards will save us several 10's of thousand dollars. Is there competitions that require 100 meter, or is 100 yards sufficient?

Also looking for design information on shooting tables. From what I understand, bench rest shooters require a rock solid table, so post able stations may not be the answer.

Posted using Outdoor Hub Campfire

Concerns using Velcro on Shotgun

BlueEyeDevil — Tue, 21 May 2013 02:43:26 GMT

Has anyone had any negative side effects of using Velcro on their shotguns to mount side saddles?

I am not worried about shells falling out, just the effect directly to the gun.

I have a new 870 tactical, and I really don't want to ruin the finish, and damage the gun.

My primary concern is rust getting started under the strip.

A bigger concern is after reading a thread when I goggled "rust & shotgun & Velcro"

Has anyone had any crazy side effects like the gentleman in the thread I read where the finish came off his 870 tactical?

Gen 3 G36 Loading

F106 Fan — Tue, 21 May 2013 02:41:59 GMT

Let's skip over all the Internet rumors about FTE, etc. and get to loading for the G36. By all accounts, the guns work perfectly with SD quality ammo. Similarly, there seem to be some problems with range ammo like WWB and Federal Champion. But let's just skip all that...

I have some Montana Gold 230 gr CMJ and some Extreme 230 gr TMJ plated plus some cast 200 gr LSWC and 230 gr LRN.

The question is, what works in a G36? I think I'm more interested in muzzle velocity than actual charge as I doubt we will have the same powders. Nevertheless, complete load data would be a help.

Anybody around here load for a G36?

EDIT: I'm thinking about 6.2 gr of Unique to get around 850 fps. I just happen to have a full can and nothing else to use it for.

Richard

10-22 will not feed.

I Shooter — Tue, 21 May 2013 02:32:10 GMT

I put together a 10-22 from parts and I am having trouble getting it to feed.

It was built to fire the Aguila 60 gr. The barrel has a 1 in 9 twist. After I got it together I tested it out for function by feed rounds through the action. I then took it out the the range. The first ten rounds went fine. I reloaded the mag and started having feeding problems.

The first three rounds stuck in the chamber half way in. It was really hard to get them out pulling on the charging handle. I took it back into the house and cleaned it. I checked the chamber to see if it was to tight by dropping a round in the chamber and pulling it back out. That went well, there was no problem. It fell into the chamber and was very easy to pull out. Put it all back together after cleaning and went back to my range. The first three fired then I got four no fires then one round fired that wasn't all the way chambered and blew out the side next to the rim. I went back in the house and cleaned the gun and checked to make sure that the bullet had went out the barrel.

I then polished the chamber with qtips on the end of a drill with a little Flitz polish. I ran twenty qtips into the chamber half with the Flitz then one with out. It seemed to polish up nice.

Back to the range. Nothing had changed the first three didn't feed more than half way into the chamber. Then they started going in deeper. Maybe sticking out by only a 1/4". The last round chambered all the way and fired. I filled the mag again and more of the same. I quit for the day.

The next day I took the new barrel off and put the old barrel on and it failed to feed CCI stingers. They would get stuck half way in the chamber. I changed back to the new barrel then tried to feed the 60gr through it. No luck they would go part way in the chamber part of the time out of 10 rounds only one chambered completely.

I am at a loss as to what could be wrong. I thought goop or wax was causing the problem but that isn't so because you can drop the rounds in the barrel with out cleaning it with no problems.

I have ordered a Kidd charging handle with the three springs. May be the old spring isn't giving enough power the put the case in all the way. I do know that I put in a new plastic buffer and it has been beat up really bad. So I ordered the Kid version of the buffer too.

I am at a loss as to what is wrong. Any one have any ideas? The mags are new and just to be safe I took one apart to clean it and shouldn't have bothered. It was fine as I thought it would be.

Thank you much for your time.

20sf hunting upgrades

tascofeldman — Tue, 21 May 2013 02:25:31 GMT

New to the forum but not Glocks. Swapped into a LNIB 20 sf and am planning to make it my woods walking, hunting gun as well as 2 legged varmint control. I understand that Glocks are perfect and cannot be improved upon but what mods have y'all done or would recommend. I'm thinking 6" ported barrel, who makes the best for this purpose? Sight upgrades, thinking night sites, what brand, adjustable? Stainless guide rod for extra recoil dampening? Trigger upgrades? I know that's a lot to ask but am in this one too cheap so got room to play. Thanks all!!

Using Slang Words Inside a Bank?

Pawcatch@aol.co — Tue, 21 May 2013 02:19:29 GMT

I was in the bank today withdrawing some money from my mm account when I slipped up and called a fairly large withdrawal my "extra sharp cheddar".
The teller then looked at me like I just killed a kitten.I then told her that I meant money and walked off.

I really didn't mean to use slang,it just came out.
Does this ever happen to you?

Surefire X300U 500 Lumen Light Review

plouffedaddy — Tue, 21 May 2013 02:10:52 GMT

I've had the Surefire X300U for a while now but never did a review; so here goes...

Pros:
-500 lumens with a good balance of throw/spill
-Uses two 3V CR2 lithium battery.
-Comes with a 1913 and universal mount/insert so it'll fit most modern rail systems to include rifles
-It handles recoil well. I've used the light on my G20 with hot ammo as well as on an AK with 0 issues from the recoil
-Rocker switch can be used for temporary and constant on modes
-Great warranty
-Great reputation for durability
-4oz weight

Cons:
-1.5 hours of constant on. The old battery life vs lumens issue is at play here.
-It's extremely tight when mounted on some guns. This could be a pro for some but, on my Glocks for example, the light is seemingly stuck on the gun and I've had to tap it with a rubber mallet while pulling down the tabs before to get it off.
-Price. No getting around it---it's expensive. It generally runs around $210-240.

Summary:

It's an excellent all around weapon light. It's versatile, bright, and durable. The big question is whether or not it's worth the money. Only you can answer that ultimately I suppose.

Here's a video showing the light in use on several guns, a comparison with some different lights, some night shooting, and a discussion of the pros/cons of the light:

Surefire X300u (Ultra) 500 Lumen Weapon Light Review (HD) - YouTube

1911 Grip Help

XshooterX — Tue, 21 May 2013 01:56:51 GMT

A friend of mine just bought a used RIA full size 1911. I don't know much about 1911's other than basic operation and field stripping. I'm going to get it cleaned up and lubed for him and thought I might replace the old worn out rubber grips. The only brand I know of is VZ, and while I'm sure they are good, they're more than I'd like to spend. Any suggestions on decent grips for about half that price? I don't even know what makes a quality 1911 grip. I see lots at gun shows, but I always assumed they were sub par in some way. Any help is greatly appreciated.

Posted using Outdoor Hub Campfire

How do you manage these when bugging out?

Stupid — Tue, 21 May 2013 01:54:26 GMT

Just a few things that come to mind:

1. How do you manage security? You could ran into a group of robbers. Even 1-2 would be hard to handle unless you shoot everybody on sight.
2. How do you manage injury or sickness? Even just the basic wear and tear would put you out.
3. What terrain you plan to cross? Regular highways or snowy mountains?
4. What about the weather? You can't expect 70 degree with sunshine all the way, can you? One rain would destroy probably 90% of your goodies in your BOB.
5. How far do you plan to go? 10 miles or 100 miles? On foot or in a car? Keep in mind, when you bugging out, there might be thousands of others doing the same.
6. Where do you plan to go? Does your destination have food, water, shelter and security etc.?

anyone own the rock island tcm ???

*ASH* — Tue, 21 May 2013 01:43:43 GMT

man im thinking on buying one .

anyone ?

AR'S on the rack!

vallelbg — Tue, 21 May 2013 01:36:50 GMT

Went in my local Academy today, and seen 5 DPMS, 1 SIG, and 1 S&W M&P 15 all at pre panic prices. Too bad they didn't have any ammo to go with them.Well, it's a start.

Finally... His and Hers!

HolyHandGrenade — Tue, 21 May 2013 01:32:50 GMT

Finally after dealing with the crazy NJ gun buying process... :whistling: :yawn: G21 for me. G19 for my better half.

Also have an FDE Gen 4 G35 on the way. Will updade with a his, his, and hers upon arrival!

Harsh Criticism of Gang of 8 Immigration Bill

czsmithGT — Tue, 21 May 2013 01:09:52 GMT

And pretty much everything to do with current immigration policy fiascos.

http://www.breitbart.com/Big-Governm...proval-machine

�In the rare case that an officer attempts to issue an NTA, it must first be approved by a secretive panel created under DHS Secretary Janet Napolitano, which often denies the officer�s request," Palinkas explains. "Illegal aliens are then permitted to remain in the United States as USCIS officers are not able to take action or contact ICE agents for assistance.�

"Perhaps most importantly, Palinkas argues that the current political leadership at his agency holds the belief that USCIS's role is not to serve America or Americans; rather, he claims they believe that USCIS is supposed to serve the illegal immigrants and the immigration lawyers who come through the doors of the agency on a regular basis."

�The attitude of USCIS management is not that the Agency serves the American public or the laws of the United States, or public safety and national security, but instead that the agency serves illegal aliens and the attorneys which represent them,� Palinkas said. �While we believe in treating all people with respect, we are concerned that this agency tasked with such a vital security mission is too greatly influenced by special interest groups�to the point that it no longer properly performs its mission.�

Here Is What I Want For My Birthday

Eric — Tue, 21 May 2013 01:02:29 GMT

A Mercedes G63 AMG 6X6!!!

Attached Thumbnails

M7 bayo scabbard

FireForged — Tue, 21 May 2013 01:00:01 GMT

So I am trying to adapt a m7 bayo scabbard to fit my glock knife and I have a question.

Does anyone know how to pull the top piece off of the lower section. I need to remove the metal leaf that keeps the blade from moving around. This leaf makes the fit of the glock knife a little too tight. I figure if I remove one side of the leaf or remove it completely, it will be a nice alternative to the stock glock sheath.

Semi successful march for peace/non-violence in Detroit...

steveksux — Tue, 21 May 2013 00:53:46 GMT

It went pretty well, except for a couple of bystanders who were drinking. And got into an argument. That degenerated into a stabbing.

But hey! Nobody got shot! Its a start!

The march for peace resumed without further incident.

Can't we all just get along?

Randy

New G36?

District18 — Tue, 21 May 2013 00:41:58 GMT

I was checking out a brand new Gen 3 G36 today and it appears to have a new style RSA. Anyone have experience with one of these? Are they good to go?

Would you trust your life to a .40 Glock converted to 9mm?

BBMW — Tue, 21 May 2013 00:32:39 GMT

One of the advantages of .40 (or 357SIG) Glocks is that they can easily be converted to 357SIG (or conversely to .40), or to 9mm, if not quite so easily or directly.

In converting to 9mm, a third party conversion barrel is necessary, along with a 9mm magazine. The slide stays the way it is, designed for a .40 case head.

The question being, would you trust a .40 converted to 9mm as a self defense weapon? Are there more likely to be feeding/extraction/ejection issues when converted?

I'm thinking in terms of a G27 as the base gun, but I don't think it matters which is the base model.

houston: drunk driver kills harris co so

uzimon — Tue, 21 May 2013 00:23:13 GMT

http://www.myfoxhouston.com/story/22...spect-detained
Rip

Harvard Mass Steel Challenge 5/18

Jason L — Tue, 21 May 2013 00:16:37 GMT

We had a great time! I won Iron Sight Pistol with my Glock 17. It is stock except the sights, and recoil spring ( 13lb )

http://www.youtube.com/watch?v=HSy4oOHBg6Q" target="_blank">http://www.youtube.com/watch?v=HSy4oOHBg6Q

17L and 24 production

RonS — Tue, 21 May 2013 00:10:48 GMT

Are these seasonal? Every few years? Sorry Ron, you missed the boat? Saw a 17L set up with a red dot milled into the slide at a recent shoot and would really like to have one. Always liked the look and I would enjoy having a completely impractical gun for pure fun since I already have a purely practical G26.

Mas reviewed my latest book

ChiefWPD — Tue, 21 May 2013 00:05:59 GMT

May Ayoob was kind enough to review my book, School Administrators Guide to Practical Handgun Training. I try to pull the subject away from whether guns are good, bad, evil, whatever. I attempt to simply address the question; what is the most effective way to protect those inside a school from an armed assault until such time as the armed, properly equipped and trained first responders get there?

I first met Mas sometime during the middle 1980s when I was a lt. with the NYPD Firearms and Tactics Unit. Good guy.

Anyway, here's the link to his article:

http://backwoodshome.com/blogs/MassadAyoob/

:wavey:

twist rate

win — Tue, 21 May 2013 00:04:41 GMT

Can some one tell me what twist rate the ak's have in both the 5.45 and 7.62?
thanks again
wendal

G26 Gen4 Recoil Spring Assembly & Ejector Question....

Christopher67 — Mon, 20 May 2013 23:59:55 GMT

I have a Gen4 G26, was curious IF someone can tell me if i have the newest recoil spring assembly & ejector? RSA # is 018 & the ejector # is 30274. Date the gun was made says 6/21/2012. Thanks in advance.

New Glock G3 27 with range report.

Bilrus61 — Mon, 20 May 2013 23:43:52 GMT

Went to a LGS today and there was a Glock 27 Gen3 with the green frame. Price was $490 brand new. I had some trading bait and we did the deal. Born on 5-8-13. I like the smoother grip on the Gen3 and even like the smaller mag release. If I was getting a G23 I think I would get the Gen 4 to get the dual recoil springs however. Not a issue on the G27 as both generations have the dual springs.

Took it down to the range here and put about 40 rounds through it. Had one failure to feed but that was out of a full new very stiff 22 round mag. I think the extra pressure slowed the slide down enough to cause it or it was the fact my pinky was pulling the mag backwards some. Out of the standard 9 round and a 15 round not any issues at all.

Very accurate. Just as accurate as my long gone G26. I was surprised it shot so well. Ejection was great. Strong and up and away at a perfect 2'oclock. Hope it keeps that up. Extractor held the shell firm. It would pass the old 1911 shell grab test easy. I shot Speer gold dots 165 and Win 180 gr Bonded white box. The gov't overrun. Couldn't really tell if one recoiled more than the other. The same as far as my hand goes. From memory I would say it's recoil was same as my G26 with 124gr+p. Thats about it for now. So far quite please and very relieved on the ejection of the spent case. Why it kicked them out like Hickock45's Glocks.

Oh P.S. I noticed the shell ejected the same in a full mag same as the last one with a empty mag. Did that 3 times to check. Some pistols seem to toss that last shell casing crazily. But this pistol put it out just like it was on a string with the rest of the empties out of the clip. So it would appear that the shell isn't dependant on riding the other shells in the magazine to eject. Nice.

LCR and Trigger Finger Blister...

jthrelf — Mon, 20 May 2013 23:38:28 GMT

I have a situation that maybe some of you guys can give advice on.

The LCR's trigger "apex" (curvature where your finger would fit it) seems to be somewhat high, and part of my finger is close to the top of the frame. When the gun recoils repeatedly, a blister/cut develops on that part of my finger from the frame snapping into it.

I use the first joint on my finger to pull, and the second joint is right about where the frame hits it.

I've contemplated just wrapping some athletic tape on that area for extended shooting, but wanted to see if others had ideas.

General M&P Questions

Yankee2718 — Mon, 20 May 2013 23:19:10 GMT

I have an M&P40 on layaway at the LGS, hoping to bring it home in a month or two. I have a few questions about the pistol.

1) Is the gun still suffering from rust issues or has S&W fixed those issues?
2) I've noticed that not all M&Ps have "Stainless" stamped on the slide. Has S&W moved away from stainless steel?
3) Are night sits available from S&W?
4) Will S&W still warranty the pistol if I have the slide refinished by another company?

I rented one and shot it a bit and decided to pick one up. I hope I'm not disappointed!

Hang in there, OKC.

blueiron — Mon, 20 May 2013 23:15:10 GMT

I am sitting here watching the devastation in and around OKC and am shocked at the tornado damage.

Let us know if we can somehow help.

Shooting Shortages

DonD — Mon, 20 May 2013 23:10:22 GMT

I called Graff & Sons after looking at their website. I was looking for jacketed slugs for my .357 Mags. Strangely, they were all out except for some 180gr Hornady XTP JHPs. I usually don't shoot anything heavier than their 158gr XTPs but in today's environment the price was decent, $21.89/100 and they had a good price on shipping so I got 700 of them.

I asked if they were seeing some improvement in supplies. The guy said yes but not enough for him to declare the drought is over. Don

ACT FAST FDE GLOCK 19 GEN3 on gunbroker

joeboxer22 — Mon, 20 May 2013 23:08:29 GMT

Seems like a good deal. $500 opening bid.

http://www.gunbroker.com/Auction/Vie...Item=341773844

Sig 226 9mm to .40sw

Chambered One — Mon, 20 May 2013 23:06:59 GMT

Is it possible to convert my sig P226 9mm to shoot .40 s&w?

I only ask this because every time I try to find 9mm ammo I can't but there is always .40 and I'm tired of not being able to shoot my favorite pistol I own.

I know glocks are relatively easy to convert calibers but what about sigs.

What is this... I don't even.. (youtube)

Khao — Mon, 20 May 2013 23:03:31 GMT

I'm on the weird part of youtube again.

What is this I don't even (THE BATROLL) - YouTube

I WON (DanielRadcliffe777 Reupload) - YouTube

Hank Hill listens to Dubstep - YouTube

Smoke and Prayers for our Oklahoma First Responders

Morris — Mon, 20 May 2013 22:53:51 GMT

Watching the news and am shocked. Smoke and prayers for all of you this night.

Does anyone own a rooma?

hammerkill — Mon, 20 May 2013 22:52:43 GMT

The "bride" wants one. I see them as high as 700. I will gladly pay it if they are worth it. Any first hand reviews?

edited to spell roomba right.

Mile wide tornados?

rsagona1 — Mon, 20 May 2013 22:52:01 GMT

I've heard of one mile wide tornados. But are they talking about the storm cell/top of the funnel or the actual funnel that touches the ground. I can't imagine the ground being covered for one mile.

Outdoor Hub mobile, the outdoor information engine

Anyone use Quibids?

gwalchmai — Mon, 20 May 2013 22:47:56 GMT

I saw their ad on TV and didn't believe it. Why would things sell for such low prices? If you have an iPhone for $5 would someone just bid a dollar more until it gets to a real number?

Maybe I just don't understand. I haven't actually tried it.

Bushmaster Carbon 15 for 1k?

SprawlnBrawl — Mon, 20 May 2013 22:35:46 GMT

So I bought a Bushmaster Carbon15, from impactguns about 2 months ago for 1k, now for 200 or so more could of gotten a Colt. Im so pissed at myself

posted using Outdoor Hub Campfire

Attached Thumbnails

Oklahoma Residents, Please Check In

Arquebus12 — Mon, 20 May 2013 22:26:02 GMT

I know there's plenty of regulars on GT, please say if you're all right, or more importantly, need anything.

Best wishes all 'round...