Glock Talk http://glocktalk.com/forums/ Glock Talk is a forum dedicated to discussion of the Glock Pistol, Glock 19, Glock 17 and much more. en Thu, 23 May 2013 18:12:15 GMT vBulletin 60 http://www.glocktalk.com/forums/images/misc/rss.jpg Glock Talk http://glocktalk.com/forums/ Legal problem about aging parents http://glocktalk.com/forums/showthread.php?t=1488202&goto=newpost Thu, 23 May 2013 17:59:11 GMT To try and make a long story short, my parents, dad with Parkinsons has been in a nursing home for a couple of months and is doing some better. Here... To try and make a long story short, my parents, dad with Parkinsons has been in a nursing home for a couple of months and is doing some better.
Here is the problem: he has hired a lawyer (not sure what all for) one thing is to set up power of attorney (not sure who is named) (there are outside parties involved) I don't get straight answers when I ask. He told me last night that he has to write a 4500 dollar check to the lawyer.........somebody has to be putting that up, he doesn't have access to that kind of money.
What is the best way to shut this crap down? ]]> GNG Lounge rj1939 http://glocktalk.com/forums/showthread.php?t=1488202 <![CDATA[Hepatitis ?'s]]> http://glocktalk.com/forums/showthread.php?t=1488198&goto=newpost Thu, 23 May 2013 17:13:12 GMT Anyone knowledgeable?

Of course I have Google'd a bit, but basically here's why I ask.

Without going into a long drawn out story, what are the chances of contracting it from a tattooist that had it? The environment, needles,gun,inks,table all of that. But mainly asking about the tattooist himself. The shop is clean, rubber gloves are used, things are sprayed down before and after sessions, tools and tables wrapped in plastic wrap also for each session.
But what about things like sweating? Say the artist wiped his brow with the back of a glove while tattooing?

Anyone truly up to speed? ]]> GNG Lounge wildchild http://glocktalk.com/forums/showthread.php?t=1488198 Kahr P380 reputation http://glocktalk.com/forums/showthread.php?t=1488197&goto=newpost Thu, 23 May 2013 17:10:23 GMT I owned a P380 pistol and liked it very much, but it had occasional reliability problems. I traded it away, and have been using a Ruger LCP in its... I owned a P380 pistol and liked it very much, but it had occasional reliability problems. I traded it away, and have been using a Ruger LCP in its place. The Ruger is stone reliable (as is every one I've ever seen), but I much prefer the sights and ergonomics of the P380.
So, on an impulse, I'm trying another one.
Anyone have any firmly held opinions on the littlest Kahr? Advice? Caveats?
Thanks,
Moon ]]> Kahr Club halfmoonclip http://glocktalk.com/forums/showthread.php?t=1488197 G21 G4 vs. G30S for Do It All Handgun? http://glocktalk.com/forums/showthread.php?t=1488196&goto=newpost Thu, 23 May 2013 17:09:46 GMT I'm looking to get one of these 2 guns and wanted to get some other opinions them.
This gun will be my home, range, carry and even backup gun for bow hunting. Currently I have a 1911 that serves all these purposes, but I'm just too worried about scratching/messing it up when in the woods. I prefer to have only 1 style of handgun and practice exclusively with it in the caliber I carry. Years ago I owned Glocks, but wondered into the 1911 camp awhile back and loved the guns. I'm back now and want that Glock reliability and workhorse readiness of this awesome pistol.
I have CCed a commander 1911 the past couple years in a MT VMII. I have no problem walking around in jeans and a tighter fitting untucked t-shirt and keeping it hidden. My wife can't even tell, unless she feels it. I'm 6' and about 210# and my big shoulders with a small waist really helps with keeping things on the belt line hidden. Things just disappear =)
I went into my LGS yesterday and compared my commander with the 21 and 30 G4 models they had on hand and to my surprise, I found the 21 is both shorter height and length wise! WHAT?!! That was completely unexpected, especially considering the barrel on the 21 is 4.6, not 4.25! When I compared the grip width, the difference was almost unnoticeable but I'm sure with calipers the 1911 would be a hair narrower. The big difference is with the slide width, which brings me to the G30S. I haven't seen one in person yet, but it appears it's got a slide width similar to my 1911, unfortunately the barrel is shorter along with the grip length/mag capacity.
So that's my experience. Now I'd like to hear which gun you guys think will meet my needs and expectations. ]]> General Glocking 9mmasta http://glocktalk.com/forums/showthread.php?t=1488196 Major problem with my 450/550 hybrid http://glocktalk.com/forums/showthread.php?t=1488195&goto=newpost Thu, 23 May 2013 16:59:01 GMT Some of you may recall the sweet deal I snagged for a dillon 450 that had been converted to a 550 with everything but the frame. Sadly, today I... Some of you may recall the sweet deal I snagged for a dillon 450 that had been converted to a 550 with everything but the frame.

Sadly, today I noticed a MAJOR problem..

























I'm TEARING through bullets at an unsustainable rate.. Time to order a new batch I suppose! :rofl: ]]> Reloading FiremanMike http://glocktalk.com/forums/showthread.php?t=1488195 Hmmm... Not sure if good shoot or not... http://glocktalk.com/forums/showthread.php?t=1488194&goto=newpost Thu, 23 May 2013 16:54:13 GMT I'm up in Idaho visiting family and I saw this story in the local paper.

While on a ride-along yesterday with my brother(county deputy), he said he was on the fence on this one...

Watching the video, I'm not sure if it was a good shoot or not based on the fact that the suspect had his hands on his head for 5 seconds and was apparently complying when he was shot...

What do you guys think?

http://www.kxly.com/news/north-idaho...z/-/index.html



https://s3.amazonaws.com/s3.data.spo...40x360.96k.m4v


Quote:
The shooting happened on the evening of November 12th, 2011. Jeffrey Flinn was driving drunk when he crashed his car. Two hunters stopped to help him and Flinn stole their truck. He then led three separate law enforcement agencies – Idaho State Police, The Lewis County Sheriff's Office, and The Nez Perce Tribal Police – on a chase.
Spike strips laid down by ISP eventually stopped the stolen car. Police dashcam video shows Flinn open the driver's side door, sit facing outward and fire one shot from a weapon at officers. Officers respond by firing more than two dozen shots at Flinn. Flinn then exits the vehicle unarmed and with his hands above his head and then, for reasons that remain unclear, officers fired several more shots, hitting Flinn, who died at the scene
]]> Cop Talk vart http://glocktalk.com/forums/showthread.php?t=1488194 Now we are to PC the charge Gays with crimes!! http://glocktalk.com/forums/showthread.php?t=1488193&goto=newpost Thu, 23 May 2013 16:33:18 GMT Fl woman charged for have sexual relations with a minor!

http://www.wbzt.com/go/news/sections....html?feed=120...

But the PC crowd says it's perfectly fine for gays to do it and not be charged!:steamed: So the future is here next it will be fine for them to have sex with any age group!:faint: ]]> Political Issues Gunnut 45/454 http://glocktalk.com/forums/showthread.php?t=1488193 Cultural Marxism Demands a Sacrifice http://glocktalk.com/forums/showthread.php?t=1488192&goto=newpost Thu, 23 May 2013 16:32:25 GMT http://takimag.com/article/cultural_marxism_demands_a_sacrifice_john_derbyshire/print#axzz2U8MFnW1z http://takimag.com/article/cultural_...#axzz2U8MFnW1z ]]> Political Issues maxsnafu http://glocktalk.com/forums/showthread.php?t=1488192 How long before corrosive primers corrode rifle? http://glocktalk.com/forums/showthread.php?t=1488191&goto=newpost Thu, 23 May 2013 16:26:01 GMT Gentlefolk, I finally got to play with my 1928 Mosin Nagant this past weekend. The 7.62x54r cartridges I used were from some sealed Russian origin... Gentlefolk,

I finally got to play with my 1928 Mosin Nagant this past weekend. The 7.62x54r cartridges I used were from some sealed Russian origin probably dating back to the Crimean War.

They worked well, and it was kinda cool to hear the vacuum break when I cracked the can, but I am supposing that this ammo is using corrosive primers.

Despite intentions, I have not yet had the time to clean the Mosin. I put maybe 20 rounds through it during the firing session.

My question then is how much time do I have before the residue becomes an issue? Is this a matter of hours? In which case I am too late.

A matter of days? A matter of weeks?

I know the best practise is to clean after diring, but the best laid plans and all that, it just didn't happen...

Thx!! ]]> General Firearms Forum Pier23 http://glocktalk.com/forums/showthread.php?t=1488191 Good .22LR? http://glocktalk.com/forums/showthread.php?t=1488190&goto=newpost Thu, 23 May 2013 16:22:33 GMT Can anyone recommend a good, cheap (probably bolt action, but maybe not) rifle in .22LR? I have little experience and knowledge outside of... Can anyone recommend a good, cheap (probably bolt action, but maybe not) rifle in .22LR? I have little experience and knowledge outside of military-style firearms, but have found myself with an extra 10x scope and, naturally, need a gun to put it on because selling the unused scope would just be silly. I guess the only thing to consider is that I need a picatinny rail for my scope w/ rings. ]]> Rimfire Forum Neero http://glocktalk.com/forums/showthread.php?t=1488190 QUICK Powder Valley has Hornady 55 FMJs http://glocktalk.com/forums/showthread.php?t=1488189&goto=newpost Thu, 23 May 2013 16:19:41 GMT From their FB page... Powder Valley
Hornady sent us a few good items. Again, not much to crow about, but at least it's something. ]]> Reloading Boxerglocker http://glocktalk.com/forums/showthread.php?t=1488189 Feed failure on G23 http://glocktalk.com/forums/showthread.php?t=1488188&goto=newpost Thu, 23 May 2013 16:14:10 GMT Hi..newbe here. On my brand new G23 40 cal, I am getting a lot of feed failures...8 failures shooting 150 rounds of various mfg and weights. No... Hi..newbe here. On my brand new G23 40 cal, I am getting a lot of feed failures...8 failures shooting 150 rounds of various mfg and weights. No pattern seen, Just frequent feed failures with both magazines. Reoiled gun still have the problem. Any one got any suggestions. Thanks in advance. ]]> General Glocking Bob Helt http://glocktalk.com/forums/showthread.php?t=1488188 Just A Bunch A Wild And Crazy Guys Who Like Guns And Money http://glocktalk.com/forums/showthread.php?t=1488187&goto=newpost Thu, 23 May 2013 16:12:42 GMT http://www.kprcradio.com/pages/waltonandjohnson.html?article=11313090 http://www.kprcradio.com/pages/walto...ticle=11313090 ]]> GNG Lounge Red Stick http://glocktalk.com/forums/showthread.php?t=1488187 *Video* Not Good! What Happened @ 4:30 Into This! ??? http://glocktalk.com/forums/showthread.php?t=1488186&goto=newpost Thu, 23 May 2013 16:04:11 GMT :crying: I have one of these sitting a foot from me.


To be honest, although "crude", this Charter has worked more than not. My Kel-Tec PF-9 was junk. :dunno: ]]> General Firearms Forum ULVER http://glocktalk.com/forums/showthread.php?t=1488186 <![CDATA[75 officers attend fallen officer's daughter's Kindergarten promotion]]> http://glocktalk.com/forums/showthread.php?t=1488185&goto=newpost Thu, 23 May 2013 16:02:46 GMT http://www.ktar.com/22/1636251/PD-watch-fallen-officers-daughter-graduate http://www.ktar.com/22/1636251/PD-wa...ghter-graduate ]]> Cop Talk ClydeG19 http://glocktalk.com/forums/showthread.php?t=1488185 Lined holsters vs. unlined? http://glocktalk.com/forums/showthread.php?t=1488184&goto=newpost Thu, 23 May 2013 15:58:05 GMT I'm wanting to buy a leather holster and mag holders for my
G22. Most of my holsters are unlined, but they are all for revolvers. I have one El Paso holster for my GP-100 that is lined and is very nice.

Is it really worth the extra cost for me to buy a lined holster say from High Noon? It runs the price up about $50-$70. ]]> General Glocking Critch http://glocktalk.com/forums/showthread.php?t=1488184 Apple Needs More Immigration To Pay Lower Wages... http://glocktalk.com/forums/showthread.php?t=1488183&goto=newpost Thu, 23 May 2013 15:51:29 GMT ...To Make Higher Profits To Not Pay Taxes Upon. ... ...To Make Higher Profits To Not Pay Taxes Upon.

http://www.vdare.com/posts/apple-nee...pay-taxes-upon

"Steve Jobs' widow Laurene Powell Jobs is a big pusher of Immigration Reform"

{snip}

"How can Ms. Powell Jobs afford to lobby for more subsidies for the children of illegal immigrants if Apple has to pay the market rate for American engineers?" ]]> Political Issues maxsnafu http://glocktalk.com/forums/showthread.php?t=1488183 The Beheading Incident in Britain http://glocktalk.com/forums/showthread.php?t=1488182&goto=newpost Thu, 23 May 2013 15:41:50 GMT Hello Mas,

As you've no doubt heard by now, there was a ghastly incident across the Pond in Britain yesterday, when 2 terrorists ran a man over (?), then got out of the car, and cut his head off in broad daylight.

Needless to say, this is getting a lot of attention over in the GNG thread. We're all chiming in with our own "what if it happened here/in front of us" scenario. So far, the general consensus is very simple: shoot the bastards on sight, and keep shooting until they are no longer a threat.

Apparently, these two terrorists just stood around with bloody knives in their hands, ranting about God knows what to a nearby bystander who was holding a camera. It took 20 minutes for the Police to respond, and when they did, they were both shot for attempting to rush/harm the officers in question. That they (the officers) did the right thing is not in doubt.

Here's what isn't so clear: Are we legal to react as such below? I don't think that there's a precedent for such a case as this.

I have made up my mind: if I came across an incident where a beheaded guy was laying in the street, and nearby were two men yelling religious extremism while holding bloody knives, and people were scampering away from them/pointing/yelling for help, etc etc, and it was QUITE CLEAR on what had just occurred...I'd shoot them both. I'd pull out my legally-carried Glock 22, and I'd shoot them both, without pre-amble. No warnings, no yellings; I'd just shoot them both. And I'd keep shooting them until they were no longer a threat. If I have to reach into my pocket for my spare mag, so be it.

So, as I mentioned above, what is your take on this? Can you give us all some perspective to think about and consider if, God Forbid, any of us should ever have to bear witness to such a horrible incident as this? Would I be wrong, in any way, for shooting these men?

I know this is a long and drawn-out scenario/question, but I really believe that, in light of this awful incident, when everybody's blood-pressure is up over it, that a clear voice of reason, logic, knowledge, wisdom, and calm such as yourself can really help us out here.

Thank you very much! ]]> GATE Self-Defense Forum Jade Falcon http://glocktalk.com/forums/showthread.php?t=1488182 Trijicons for 30S http://glocktalk.com/forums/showthread.php?t=1488181&goto=newpost Thu, 23 May 2013 15:39:45 GMT Hey All, I am trying to locate which Trijicon sights I need for my 30S. Do I need the ones for the 30 or for the 36? Any help would be... Hey All,

I am trying to locate which Trijicon sights I need for my 30S. Do I need the ones for the 30 or for the 36?

Any help would be appreciated!

Thanks! ]]> General Glocking Dakota3711 http://glocktalk.com/forums/showthread.php?t=1488181 All too true, unfortunately... http://glocktalk.com/forums/showthread.php?t=1488180&goto=newpost Thu, 23 May 2013 15:32:19 GMT http://www.theonion.com/articles/our-thoughts-go-out-to-oklahoma-says-congressman-m,32514/ ... http://www.theonion.com/articles/our...ssman-m,32514/

http://dailycaller.com/2013/05/20/de...-hit-oklahoma/

Never let a crisis go to waste... ]]> GNG Lounge railfancwb http://glocktalk.com/forums/showthread.php?t=1488180 New Glock owner from Louisville, KY http://glocktalk.com/forums/showthread.php?t=1488179&goto=newpost Thu, 23 May 2013 15:24:59 GMT Bought a 4th G 23 about a month ago. Took my concealed carry class last week. Enjoying learning more on here. Bought a 4th G 23 about a month ago. Took my concealed carry class last week. Enjoying learning more on here. ]]> Introduction Forum BrentC http://glocktalk.com/forums/showthread.php?t=1488179 Extractor Usage http://glocktalk.com/forums/showthread.php?t=1488177&goto=newpost Thu, 23 May 2013 14:52:22 GMT What would be your best estimate as to how much usage do you think this extractor has had? I bought it thinking it was new but when I got home I saw... What would be your best estimate as to how much usage do you think this extractor has had? I bought it thinking it was new but when I got home I saw that it was not.
Attached Thumbnails
Click image for larger version Name: CIMG0276(1).jpg Views: N/A Size: 52.2 KB ID: 233502   Click image for larger version Name: CIMG0276(2).jpg Views: N/A Size: 52.2 KB ID: 233503  
]]> General Glocking jmsfmtex http://glocktalk.com/forums/showthread.php?t=1488177 30sf http://glocktalk.com/forums/showthread.php?t=1488176&goto=newpost Thu, 23 May 2013 14:51:28 GMT their are no 30s to be had in e. tn so i came home today with a new 30sf and i put my 36 slide on it ,will try to shoot it tomorrow. has anyone... their are no 30s to be had in e. tn so i came home today with a new 30sf and i put my 36 slide on it ,will try to shoot it tomorrow.

has anyone done this and did it work right.

anyone with a 30s and a 30sf,is their any diffrent in the two frames ]]> General Glocking FYRELT http://glocktalk.com/forums/showthread.php?t=1488176 Saw something weird last weekend. http://glocktalk.com/forums/showthread.php?t=1488175&goto=newpost Thu, 23 May 2013 14:50:51 GMT Well...

I know when I tell this story, there will inevitably be comments that include the words "Tin foil." That's ok, flame on.

Sunday evening, I headed out to pick up a couple things at the grocery store. Where winchester road intersects with eastern star, winchester is a fairly steep incline, and it faces east. I was sitting on that hill, with one car in front of me waiting to turn left onto winchester.

Because of the incline, you are naturally kind of looking up. The sun was behind me as I was facing east. Well, the car in front of me pulled out, and as I started to pull towards the stop sign to make my turn, I catch a glint of something very shiny and reflective in the sky off slightly to my left at what appeared to be from my vantage point, about 3000 feet in elevation, at a distance of maybe half a mile out.

So, as one would naturally do, I turned back towards it to try to see what it was. I was expecting to see an airplane, but there was no plane. In fact, there was nothing of any discernable shape. The only way I can describe it is that it looked like a piece of polished metal like one would see on the fuselage of a plane, but it kinda looked like it was sticking out "through" the sky.

The "edges" of it were not defined, and in fact, appeared to sort of change and undulate as this thing moved slowly from north to south. It may sound odd, but the first thing I thought of was something off of star trek in the realm of cloaking technology.

I watched it for probably thirty seconds, and finally, whatever it was started "cloaking" (sorry, thats the only way I know to describe it) from it's south end towards it's north end, like it was covering itself with the blue of the sky around it, until finally it disappeared.

I have puzzled over this for several days, and can come up with no logical or natural explanation for what I saw.

I guess I am a believer in ufo's having had a very strange experience when I was a child. But i also believe that the skunk works are always going at full steam where defense tech is concerned, and consider it entirely possible it could have been a piece of military technology as well.

Anyone else ever seen or experienced anything similar? ]]> GNG Lounge MaxxAction http://glocktalk.com/forums/showthread.php?t=1488175 What am I forgetting? http://glocktalk.com/forums/showthread.php?t=1488174&goto=newpost Thu, 23 May 2013 14:43:08 GMT :headscratch: :dunno: :headscratch:

:dunno: ]]> GNG Lounge mhambi http://glocktalk.com/forums/showthread.php?t=1488174 Wolf Blitzer and the atheist... http://glocktalk.com/forums/showthread.php?t=1488173&goto=newpost Thu, 23 May 2013 14:40:04 GMT Kind of amusing, Wolf Blitzer asking a woman "Do you thank the Lord" for the decision to get into a safer location in Moore, OK.


I loved her response, though. "I don't blame anyone for thanking the Lord." ]]> GNG Lounge WarCry http://glocktalk.com/forums/showthread.php?t=1488173 Chicago Killings Cost $2.5 Billion as Murders Top N.Y.’s http://glocktalk.com/forums/showthread.php?t=1488171&goto=newpost Thu, 23 May 2013 14:29:44 GMT Shootings cost Chicago $2.5 billion a year, or about $2,500 per household, according to the University of Chicago Crime Lab. ---Quote--- Chicago... Shootings cost Chicago $2.5 billion a year, or about $2,500 per household, according to the University of Chicago Crime Lab.
Quote:
Chicago Killings Cost $2.5 Billion as Murders Top N.Y.’s
Quote:
Chicago, the third-largest U.S. city, last year recorded a homicide rate more than three times New York City’s and double that of Los Angeles. It also had about 900 more non-fatal shootings than New York despite having a third as many residents. New York Mayor Michael Bloomberg is co-founder of Bloomberg LP, parent company of Bloomberg News.
]]> GNG Lounge RussP http://glocktalk.com/forums/showthread.php?t=1488171 <![CDATA["Assaulted: Civil Rights Under Fire" THEATRICAL TRAILER RELEASED]]> http://glocktalk.com/forums/showthread.php?t=1488170&goto=newpost Thu, 23 May 2013 14:20:50 GMT Dead Patriot Films announced its pro-Second Amendment movie will hit the movie theaters this summer. Initially planned as a TV only release on PBS,... Dead Patriot Films announced its pro-Second Amendment movie will hit the movie theaters this summer.
Initially planned as a TV only release on PBS, a deal was struck with a distribution company for a nation wide theatrical release.
The narrator of the movie is the pro-Second amendment singer and actor Ice T.

"Assaulted" was made possible bt the donations of thousands of Calguns members - California's largest pro-gun Internet forum as well as undoubtedly many Glocktalk members. Thank you to all who contributed.

Enjoy the newly released official theatrical trailer:
]]> GNG Lounge Zombie Surgeon http://glocktalk.com/forums/showthread.php?t=1488170 Link To Fuller Index? http://glocktalk.com/forums/showthread.php?t=1488169&goto=newpost Thu, 23 May 2013 14:20:25 GMT Hello-I am looking for a link to the Fuller Index. Thank-you for your time.:wavey: Hello-I am looking for a link to the Fuller Index. Thank-you for your time.:wavey: ]]> Caliber Corner Coffee Dog http://glocktalk.com/forums/showthread.php?t=1488169 Jackson, MS Mayoral Candidate http://glocktalk.com/forums/showthread.php?t=1488168&goto=newpost Thu, 23 May 2013 14:01:26 GMT This guy will be the death nail in the coffin for the city of Jackson... I no longer live in the city, but what happens in Jackson seriously affects... This guy will be the death nail in the coffin for the city of Jackson... I no longer live in the city, but what happens in Jackson seriously affects the surrounding tri-county area. The democratic primary was a 3 ring circus.

The probable next mayor of Jackson wants Columbus taken out of the school books...

http://www.wapt.com/lumumba-columbus...ref_map=%5B%5D ]]> Political Issues whoflungdo http://glocktalk.com/forums/showthread.php?t=1488168 Running Away? http://glocktalk.com/forums/showthread.php?t=1488167&goto=newpost Thu, 23 May 2013 13:58:01 GMT Mas,

A comment I have heard repeatedly when someone defends the carry of a mouse gun (full disclosure - I often carry an LCP) is, "If the BG is more than a few feet away, I am going to run. not fight."

I have given it some though and decided it makes sense, in a narrow set of situations. Not a good idea if you are not alone, etc.

My reasoning:

1 - From what little I have read people miss a lot and it gets much worse when your target is in motion.

2 - While it may be legal to defend onself with deadly force, I have read quite often that the financial and emotional stress of defending such an action is enormous. Running away avoids this.

My concerns are:

1 - There is a time when you will have to fight. Do you think the pause to evaluate may be fatal?

2 - Well, really do not want to get shot in the back.

So, what do you think? Is running a viable option in certain situations? Is it another option we should keep in mind? Or will a focus on this degrade a fight reponse or slow reactions?

Thanks,
Rico ]]> GATE Self-Defense Forum J_Rico http://glocktalk.com/forums/showthread.php?t=1488167 Concealed Carry in The Galleria (Housto) http://glocktalk.com/forums/showthread.php?t=1488166&goto=newpost Thu, 23 May 2013 13:50:30 GMT Heading there and was wondering if the mall is posted with the 30.06 sign. Their website was not helpful. Thanks:wavey: Heading there and was wondering if the mall is posted with the 30.06 sign. Their website was not helpful.
Thanks:wavey: ]]> GNG Lounge Volksman http://glocktalk.com/forums/showthread.php?t=1488166 Federal 45 Auto 230 Grain HST 6 Shot Short Barrel Test http://glocktalk.com/forums/showthread.php?t=1488165&goto=newpost Thu, 23 May 2013 13:46:57 GMT This test may interest you if the G30 and G36 are your daily carry. Full write up and more pictures:... This test may interest you if the G30 and G36 are your daily carry.

Full write up and more pictures:
http://mousegunaddict.blogspot.com/2...ain-hst-6.html

Teaser Picture:
Click the image to open in full size.


Just the video:
]]> Caliber Corner Ljutic http://glocktalk.com/forums/showthread.php?t=1488165 Informant: Islamic Compounds in America are Training for Jihad http://glocktalk.com/forums/showthread.php?t=1488164&goto=newpost Thu, 23 May 2013 13:41:00 GMT http://lawenforcementtoday.com/tag/hancock-ny/ In Hancock, NY an Islamic community that sits on 80 acres of land has decided to form its own... http://lawenforcementtoday.com/tag/hancock-ny/


In Hancock, NY an Islamic community that sits on 80 acres of land has decided to form its own government. They call their community: The Town of Islamberg. They have their own mayor, deputy mayor and five town council members. None of them are elected, of course.

They even boast that their “town” provides departments of education, medical, finance and land development services.

This Islamic compound has truly become a city-state. Though not recognized as a legitimate township by the City of Hancock, this Islamic community nevertheless enforces its own laws on the “citizens” within its borders. They do so by using the iron fist of Sharia law.


They are on our soil:steamed: are we stupid or not:wow::steamed: ]]> Political Issues zeke501 http://glocktalk.com/forums/showthread.php?t=1488164 Wow http://glocktalk.com/forums/showthread.php?t=1488163&goto=newpost Thu, 23 May 2013 13:26:10 GMT I go away for awhile and this place changes:wow: Dango is back and Dinky is gone:dunno: I guess I need to spend more time in here, the... I go away for awhile and this place changes:wow:


Dango is back and Dinky is gone:dunno:


I guess I need to spend more time in here, the only sane place on GT....:supergrin: ]]> Hammerman Likens http://glocktalk.com/forums/showthread.php?t=1488163 Butt Dialed 911 while committing a robbery… http://glocktalk.com/forums/showthread.php?t=1488162&goto=newpost Thu, 23 May 2013 13:10:35 GMT :rofl: http://www.today.com/tech/busted-butt-dial-phone-really-called-911-damn-6C10018468# :rofl:


http://www.today.com/tech/busted-but...mn-6C10018468# ]]> GNG Lounge Altaris http://glocktalk.com/forums/showthread.php?t=1488162 newer reloader; crimp and primer Qs with Lee turret http://glocktalk.com/forums/showthread.php?t=1488161&goto=newpost Thu, 23 May 2013 13:01:19 GMT Newer to reloading and wondering if anyone can comment on a few items.

I'm loading 9mm using 115gr FMJ from Precision Delta and 115gr plated from Berrys with CCI SP primers and WSF Powder.

I've loaded long at 1.16 because the published data shows the min / max at 1.169.

I've loaded some different batches - target the min powder at 4.9gr and upped to target 5.1.

They've done ok but in my process I've encountered a few things I'm questioning.

I suppose my questions more related to the Lee Classic 4-hole Turret & carbide die performance.

1) Powder level - I use the Lee autodisk and tried suggested 40 for the min 4,9gr load. The 40 disk gives between 4.7 and 5.0 - mostly low. So I upped to the 43 and get 4.9 to 5.2 - mostly high. Measures verified on the Lee scale as well as a GemPro verified with check weights and accuracy to 0.05 gr. I expected more consistency than a 0.3 range. Any comments? Doesn't seem concerning to be in the 4.7 to 5.2 range.

2) I have the Lee FCD and adjusted per instructions - install die snug to shell plate, then with bullet in shell turn top in until it stops. Back out bullet and turn in top 1/2 turn. I feel some binding coming out of this die and it leaves a "knick" or "deep scratch" in the side of the brass. I have disassembled and cleaned the die and tried backing off the crimp which helped but didn't eliminate the knicks. If I back it off by more than 1/4 a turn then it doesn't crimp enough as I can push the bullet in easily. Even if I back off a full turn, I still get binding and brass knicks. The binding isn't significant effort but the knicks are deep. Any ideas?

3) That leads me to ....can anyone suggest some good good crimp / bad crimp pics? Due to the knicking and such, I'd like more visual verification of good/bad crimp.

4) What's the danger of good/bad crimps? If die adjusted per instructions am I too focused on the crimp?

5) Lee Safety Primer - I am 100% certain my primers are in the container correctly. I've even just put in 10 primers at a time so I could check, recheck and recheck again they were all facing correctly.... yet I when I actuate the priming operation I get about 1 in 10 primers upside down. Really annoying.

6) Lastly, when down to the last handful of primers in the safety prime I can't get the mechanism to drop the primer. I have to load more primers - I expect because the weight pushes them more into the mechanism. Anything I can do though? It's annoying to have to add primers to finish off the last handful of rounds and then put the unused ones back in mfg case. Also, if I'm loading a small batch of 10, I have to load 25+ primers just so my 10 come out of the actuator.

Sorry for the length appreciate any input. ]]> Reloading Smidgen http://glocktalk.com/forums/showthread.php?t=1488161 Well, this is it with the SLR-106... http://glocktalk.com/forums/showthread.php?t=1488160&goto=newpost Thu, 23 May 2013 12:47:41 GMT They are collectibles now: http://www.arsenalinc.com/usa/PRODUCTION-ENDING-ON-POPULAR-SLR-106-SERIES.html ---Quote--- SLR-106 SERIES NEWS FOR... They are collectibles now:
http://www.arsenalinc.com/usa/PRODUC...06-SERIES.html
Quote:
SLR-106 SERIES NEWS
FOR IMMEDIATE RELEASE
MAY 17th, 2013
PRODUCTION ENDING ON POPULAR SLR-106 SERIES
(LAS VEGAS) – After nearly a decade since its initial introduction into the firearms marketplace, the SLR-106 series is getting a change in to “Collector’s Item.” Production on the series officially ended......A comprehensive audit of the current offerings in the firearms industry, recent trends and near-future shifts with regard to technology and advancement all factored into the decision to discontinue the series. Arsenal’s obligations with military and government contracts, production for the movie industry and commitments to distributors and dealers also shaped this decision. The current stock of SLR-106 5.56 caliber rifles and pistols will continue to be sold until supply runs out. Arsenal’s availability list is displayed below. Additional SLR-106 products can be found by checking with Arsenal’s distributors and various dealers nationwide.
]]> The Kalashnikov Klub .38 super http://glocktalk.com/forums/showthread.php?t=1488160 Beautiful Scernery http://glocktalk.com/forums/showthread.php?t=1488159&goto=newpost Thu, 23 May 2013 12:41:59 GMT Really beautiful, especially full screen. Turn up the music, sit back, and enjoy! ... Really beautiful, especially full screen.

Turn up the music, sit back, and enjoy!

http://www.flixxy.com/planet-earth-c...m#.UVBN21dXqO4 ]]> The Lighter Side Mrs Glockrunner http://glocktalk.com/forums/showthread.php?t=1488159 Missing Squares http://glocktalk.com/forums/showthread.php?t=1488158&goto=newpost Thu, 23 May 2013 12:40:06 GMT Can you figure it out? http://www.flixxy.com/missing-square-puzzle.htm#.UVBL6ldXqO4 Can you figure it out?

http://www.flixxy.com/missing-square...m#.UVBL6ldXqO4 ]]> The Lighter Side Mrs Glockrunner http://glocktalk.com/forums/showthread.php?t=1488158 First they take our guns, then the give drivers licenses to illegals http://glocktalk.com/forums/showthread.php?t=1488157&goto=newpost Thu, 23 May 2013 12:33:50 GMT The wonderful state of CT! We have lost 35,000 jobs in 2 years, but that's not important, let's screw with people's rights and violate federal law while we are at it.

Just gets worse here every day.

Sent from my HTC One using Tapatalk 2 ]]> GNG Lounge harlenm http://glocktalk.com/forums/showthread.php?t=1488157 LEOSA and Magazine Capacity http://glocktalk.com/forums/showthread.php?t=1488156&goto=newpost Thu, 23 May 2013 12:28:33 GMT Just had a debate at work regarding carrying out of state and magazine capacity. This is specifically mentioned for NJ officers carrying in New York... Just had a debate at work regarding carrying out of state and magazine capacity. This is specifically mentioned for NJ officers carrying in New York State.

My take on this is that magazine capacity is not addressed in LEOSA. So NJ officers carrying in NY would be bound by the current law and only be able to have 7 rounds in the magazine.

Am I correct on this? I couldn't find anything to the contrary. ]]> Cop Talk 4949shooter http://glocktalk.com/forums/showthread.php?t=1488156 A Sig P226 Tacops followed me home . http://glocktalk.com/forums/showthread.php?t=1488155&goto=newpost Thu, 23 May 2013 11:57:21 GMT Image: http://i49.photobucket.com/albums/f275/suba-saab/SIG%20P226%20Tacops/b35dbf389f52eced8dce3dd8a62eadb7_zps6402cc0b.jpg This one is going to... Click the image to open in full size.

This one is going to be fun.


Posted using Outdoor Hub Campfire ]]> General Firearms Forum JaPes http://glocktalk.com/forums/showthread.php?t=1488155 Cops: cell phones = guns.. sure, so -- ? http://glocktalk.com/forums/showthread.php?t=1488154&goto=newpost Thu, 23 May 2013 11:56:50 GMT Be honest.. those who watched any 007 movies know shoes are telephones, so why can't cell phones be guns, eh?

http://www.infowars.com/cops-being-t...could-be-guns/ ]]> Political Issues Skyhook http://glocktalk.com/forums/showthread.php?t=1488154 wrong post, wrong thread, wrong forum http://glocktalk.com/forums/showthread.php?t=1488153&goto=newpost Thu, 23 May 2013 11:25:53 GMT :whistling::whistling::whistling: :whistling::whistling::whistling: ]]> General Glocking Smoke600 http://glocktalk.com/forums/showthread.php?t=1488153 Help me call upon the forces of darkness. http://glocktalk.com/forums/showthread.php?t=1488152&goto=newpost Thu, 23 May 2013 11:23:26 GMT So I've been pondering the darker side of religion lately. Things like witchcraft, wizardry, black magic, demon conjuring and so on and so forth. Can anyone suggest any reading on incantations and spirit/demon summoning practices.

My goal, ultimately, is to debunk such nonsense. I mean if you open yourself up to these beings their supposed to come and getcha right? One of the problems with the "Good Guys" in these stories is that they kinda show themselves in mysterious ways. It's always the one piece of untouched earth in a tornado, or the cancer that went into remission for no reason and so on and so forth. Well these "Bad Guys" have a rep for being blatant and out spoken. So I assume if I call them out and nothing happens (Which will be the case) that's either proof they don't exist... or they're afraid of little ole me.

Would appreciate any of you, in the know, sharing any resources for learning about such things. ]]> Religious Issues Glock36shooter http://glocktalk.com/forums/showthread.php?t=1488152 what kind of should I... http://glocktalk.com/forums/showthread.php?t=1488151&goto=newpost Thu, 23 May 2013 11:19:25 GMT can you guys give me your opinion? looking to buy a rifle for long dist shooting and want it to be as well rounded as a Glock can you guys give me your opinion? looking to buy a rifle for long dist shooting and want it to be as well rounded as a Glock ]]> General Glocking Smoke600 http://glocktalk.com/forums/showthread.php?t=1488151 thank you glocktalk... http://glocktalk.com/forums/showthread.php?t=1488150&goto=newpost Thu, 23 May 2013 11:05:56 GMT Thank you glocktalk, last year when I bought my first Glock, (first gun), I posted here and you guys all posted comments and advice that helped very... Thank you glocktalk, last year when I bought my first Glock, (first gun), I posted here and you guys all posted comments and advice that helped very much. I was reminded of this seeing the new people posting here throughout the months with the same first concerns I had. Its great that all of you share your experiences and opinions. Thanks ]]> General Glocking Smoke600 http://glocktalk.com/forums/showthread.php?t=1488150 Cell Phone = Gun ? http://glocktalk.com/forums/showthread.php?t=1488149&goto=newpost Thu, 23 May 2013 10:46:21 GMT http://www.infowars.com/cops-being-trained-that-cell-phones-could-be-guns/ http://www.infowars.com/cops-being-t...could-be-guns/ ]]> Cop Talk railfancwb http://glocktalk.com/forums/showthread.php?t=1488149 Thots on Savage Arms pump shotguns? http://glocktalk.com/forums/showthread.php?t=1488148&goto=newpost Thu, 23 May 2013 09:33:00 GMT Any reviews on Savage pumps? The Chinese made ones? Good/bad? Your thoughts welcome. Gray_Rider Any reviews on Savage pumps? The Chinese made ones?

Good/bad? Your thoughts welcome.

Gray_Rider ]]> Tactical Shotguns Gray_Rider http://glocktalk.com/forums/showthread.php?t=1488148