Glock Talk

Thots on Savage Arms pump shotguns?

Gray_Rider — Thu, 23 May 2013 09:33:00 GMT

Any reviews on Savage pumps? The Chinese made ones?

Good/bad? Your thoughts welcome.

Gray_Rider

The Romantic Wife

Hondo341 — Thu, 23 May 2013 09:21:50 GMT

Romantic Wife
A wife, being the romantic sort, sent her husband a text:
"If you are sleeping, send me your dreams.
If you are laughing, send me your smile.
If you are eating, send me a bite.
If you are drinking send me a sip.
If you are crying, send me your tears.
I love you!"

The husband, typically, non - romantic, replied:
"I am on the toilet. Please advise."

The tragedy is that millions bought into 'hope and change'

snerd — Thu, 23 May 2013 07:24:44 GMT

Quote:

Sorry but it was never really magic at all, unless you still believe that Peter Pan was a little boy who never grew up or that 3 little bears live in some enchanted forest.

He was nothing but another politician telling Miss Long and so many what they desperately wanted to hear. What did they want to hear? They wanted to hear that it was all Bush's fault.

Miss Long actually had a bad case of "Bush derangement syndrome". She invested so much in the idea that Obama was the dawning of a new day. It was adults buying into the garbage that you could fix all of the world's problems by replacing Bush with Obama.

It was rather silly and infantile but that's what 2008 was largely about!

http://www.americanthinker.com/blog/...nd_change.html

M1 Garand ammo storage......

hogship — Thu, 23 May 2013 06:48:00 GMT

To my surprise, the local GS had some Federal American Eagle ammo, specially loaded for the M1 Garand. I have a WW2 Garand ammo belt and it's my intent to load this belt up with 10 Garand clips and pack it away for long term storage in a GI metal ammo can.

Is there any reason why this wouldn't be a good way to have the Garand ammo ready for emergency use? It would be air tight, but my concern is whether the canvas ammo belt, and steel clips pre-loaded is ok, or not.......:dunno:

ooc

GSSF page down?

D53 — Thu, 23 May 2013 06:26:06 GMT

So I have tried to sign up on the GSSF website, but every time I go to the link it says the page is down. Anyone else having an issue or am I just following the wrong links? Thanks in advance.

http://us.glock.com/team/gssf
(this links to link below)

http://gssfonline.com/

I also went off of Google and the link doesn't work.

Colt sells steel case .223 ammo

MSims — Thu, 23 May 2013 06:04:07 GMT

So what does all the steel case ammo haters have to say now that says dont shoot it thru your colt? Same as tulammo,wolf,herters,silver bear and so on... Obviously colt thinks it shoots perfect in all there AR's or they wouldnt sell it... This is made by silver bear and packaged by colt...

This is .223 Colt 62gr. Steel Case Full Metal Jacket Ammo. This ammo is manufactured by JSC Barnaul Machine-Tool Plant in Russia. Barnaul is considered to be the premier ammunition factory in Russia, and it supplies most of the ammo to the Russian Military. This ammo is zinc coated steel cased, berdan primed, magnetic and non-corrosive. It comes packed in 20rd. boxes.

How do you feel about seatbelt/helmet laws?

Kevinr20 — Thu, 23 May 2013 06:03:22 GMT

Try to keep it civil.

Go.

Sent from my DROID RAZR

Lone Ranger v Rifleman?

JuneyBooney — Thu, 23 May 2013 05:55:00 GMT

Ok fellas, who in a hypothetical speed test was faster...the Rifleman or "The Lone Ranger"? :supergrin: They both seemed pretty fast to me. Which Ranger did you like best?

Do you know why I pulled you over?

steveksux — Thu, 23 May 2013 04:28:32 GMT

:whistling:

Randy

Hickenlooper is spineless turd.

Climbhard — Thu, 23 May 2013 04:17:13 GMT

Governor John Hickenlooper delays execution of Nathan Dunlap. The man who executes four in Chuck E Cheese gets an indefinite reprieve from Hickenlooper.

http://www.9news.com/news/article/33...tion-of-Dunlap

This worthless, spineless POS Governor makes me sick:steamed:

He's a supporter of "common sense" gun control, a supporter of mass murderers and a threat to America.

Are my new neighbors Irish Travellers?

HollowHead — Thu, 23 May 2013 04:10:01 GMT

The last place on our road just got sold in a short sale and it appears to be to four adults with nine kids. Our first interaction was when Liam, Meaghan, Padriag, Siobhan and all the kids went up and down the road asking about cleaning everyone's corrals, stacking hay, cutting lawns and sealing driveways for cash. HH

Allahu Akbar = Time to Draw Down

GLOCKpaperscissors19 — Thu, 23 May 2013 03:54:32 GMT

In my mind, if I ever hear any muzzie scum ever utter this, I'm clearing leather.

Denver is inundated with these somali muslims. And a few of them from Denver have already made national news for trying to kill hundreds in foiled terrorist plots. As far as I'm concerned any muslim has the burden to prove to me that he is not a terrorist or sympathetic to them. Good luck.

Pearce extension help needed!

Armanius — Thu, 23 May 2013 03:45:37 GMT

Hello everyone! I bought a couple of Glock 26 factory (+2) extended magazines. I want to replace the Glock extensions with Pearce pinky extensions (+0).

The Glock (+2) factory mags don't have the rectangular flat inserts that are in the factory 10 round G26 magazines. I'm talking about the inserts that go between the coil and the floor plate.

Is it ok to just use the Pearce extensions without those rectangular flat inserts that go between the coil and the floor plate?

Thanks for the help!

New "Man Of Steel"(Superman) Trailer

Altaris — Thu, 23 May 2013 03:22:59 GMT

So far I have been very unimpressed with the trailers for the new Superman movie.....until now.
This one looks like it could be awesome.

Man of Steel - "Fate of Your Planet" Official Trailer [HD] - YouTube

Pope Francis: "Atheists are good if they do good"

Altaris — Thu, 23 May 2013 03:02:00 GMT

But I thought some of you guys told me I was going to burn in hell, even though I did good, just because I didn't believe?

http://uk.reuters.com/article/2013/0...94L0V120130522

Who are the CO springs brothers here?

jmorris — Thu, 23 May 2013 03:01:53 GMT

Going to be there in a few weeks, any matches local?

S35vn

Copper_Candy — Thu, 23 May 2013 02:52:56 GMT

So I'm having a custom knife built in S35VN here in the next month. I have heard both good and bad about this steel, but it seems like the hardness is the determining issue. Many common knife makers are using this steel in current production, but it seems like it is only hardened to 58-59. Is this sufficient hardness to bring out the best characteristics of this steel? I'm thinking about doing a 60 on my blade, as it seems like it will bring out a better edge without compromising the toughness.

What do you all say? What has been your experience with S35VN?

New Buck Mark

C.O. — Thu, 23 May 2013 02:44:46 GMT

I bought a Buck Mark UFX a couple weeks ago. I've put around 300 flawless rounds through it so far. I am really impressed with the accuracy right out of the box. It is a great gun. I wanted a pistol to shoot that would not cost me an arm and a leg to shoot. I already had tons of 22lr for my 10/22 so the ammo shortage is not an issue right now.

Dog lovers...

Glock!9 — Thu, 23 May 2013 02:44:13 GMT

I do not even consider myself a big dog lover but wanted to post another update for those here who are and have followed a few of my posts about Rufus.

He has become very attached and defensive of my wife and kids.
He has also really become by buddy...
I work fro home and he has been spending a lot of time with me.

I guess because i dont beat him like his last owners...

Attached Thumbnails

Simple rule of borrowing gone these days?

jdavionic — Thu, 23 May 2013 02:42:08 GMT

When I grew up, I was always told that you return what you borrowed in the same condition or better. A fellow gun owner with a half dozen handguns borrowed one of mine to try out. The guy returns it filthy dirty...must have fired cheap ammo through it. Heck, I wouldn't mind if he said 'hey, I didn't feel comfortable tearing it down' or something. He just gave it back dirty as heck.

Same thing happened with a different friend that borrowed our carpet cleaner. He returned it filthy and with one of the plastic hand tools broken.

I just don't get it. I borrowed a pressure washer before getting my own. I ran it on a steep hill and burned out the motor...oil didn't get where it needed to go. I bought the guy a brand new one, same brand but better model as a replacement.

Small potatoes in the grand scheme of things. Just wondering if folks still think the way that I was taught or if that's now old school...and yes, venting too.

Remington 1100 22" barrel can it work for 3gun?

Mike Bell — Thu, 23 May 2013 02:39:40 GMT

Well I finally got to shoot my rebuilt 1100 that I want to start shooting 3gun with but ran into some problems test firing. (short cycling)

First, let me say that the o-ring is used because I can not find my bag of new ones....:steamed: So yes I know I have to change that first and try to test fire again.

But Im having doubts that the 22" barrel can get enough pressure to cycle low brass game loads.

I have never shot a 3gun match but from what Ive seen, don't you need to be able to shoot bird shot on the clays and steel?

Thinking of switching from. 40 to 10mm

zukyota — Thu, 23 May 2013 02:25:20 GMT

Like the title says, I'm thinking of switching. The only problem is I have a good bit of. 40 ammo. I want the 29sf. Could I buy a .40 barrel & plink with the. 40 ammo. Will .40 ammo feed reliably out of the 10mm mags ? Anyone here do this ? Thanks in advance for the advice.

Any reviews of "firearmsforsale.com"

Python-Hunter — Thu, 23 May 2013 02:07:44 GMT

I see that www.firearmsforsale.com has stock on various Glocks. Has anyone had experience with them.

Are all their Glocks Factory New?

I don't see anything in their descriptions stating conditions, # of magazines supplied (Gen 4 in particular).

Any help would be appreciated.
Thanks.

Sunset from Pensacola

wprebeck — Thu, 23 May 2013 01:57:20 GMT

My wife took this photo - I reckon she's got an eye for things.

The IRS: Destroying Liberty Since before You Were Born

zeke501 — Thu, 23 May 2013 01:43:25 GMT

In the fallout from the recent revelations about the Internal Revenue Service systematically persecuting conservative political groups and other enemies of President Obama, the establishment is putting on a good show of being shocked by the behavior. The reality is that the IRS is and always has been a tool of oppression and is routinely used by those in power to destroy their opponents.

The IRS has got to GO!!! :steamed:

http://www.americanthinker.com/2013/...were_born.html

SB221 passed the senate today

RMTactical — Thu, 23 May 2013 01:42:14 GMT

Mass non-compliance will be in order if this becomes law.

Quote:

Passed Senate floor 11-10 on a party line vote, to assembly next.

Hearing?
Or vote?

Important difference, this late in the session bills can move very quickly.

It's an assembly hearing we will have a last chance to testify against it.

An identical version of the bill has to pass both houses to be eligible for a full floor vote,

Any last amendments we can put in helps to run the clock out as it would have to go back to the senate again.
----------
EDIT: I called the legislature since the NELIS site was not clear.
Next step is the assembly floor for assignment to a committee.
That will probably be the Ways & Means Committee due to the fiscal impact.
It could also be judiciary Committee do to it's impact on and conflict with other laws.
it might even go back to Health and Human Services.

A public hearing is REQUIRED when it gets to that next committee!
This will be our LAST CHANCE to testify against SB221, this is the one where we need HUNDREDS to show up.
No date set yet.

If we can prevent it passing the next committee vote it dies.
If the committee amends it, it has to go back to the senate for concurrence.
If the committee passes it the next stop is a full floor vote of both houses.
It could and should die there, but with the D's majority that is not assured.
I just confirmed that SB221 has been "Interpreted" to not be a tax measure, SO IT ONLY NEEDS A SIMPLE MAJORITY FOR PASSAGE!
This is flat out wrong, weather the "Fee" (Tax) is $30.00 as claimed or the $60.00 that reality dictates a "Fee" is a TAX!
That the "Fee' does not go to the that state (for now) does not make it any less of a tax on the persons paying those "Fee's". (Taxes).

Here is a link to the current language, https://www.leg.state.nv.us/Session/...B/SB221_R2.pdf

I do not want to have to count on Brian Sandoval to veto it.
The "Mental health" sham portion is only there to make it uncomfortable for our governor to veto, it's a nasty little political trick.

What Is It?

1955mercury — Thu, 23 May 2013 01:29:35 GMT

I bought some French magazines from the 30's today and I can't read a lick of French. This is an ad that was in one from 1938. I have been having fun trying to guess what it's for.

Let's see what ya'll come up with. If you can read French, please don't tell us what it is.
I'll start it off with my guess.

Nose Bra. Does your face get that tired look with bags under the eyes by the end of the day from holding up that protruding nose. Try the new nose bra and feel the relief it offers.

G26 Extractor

jmsfmtex — Thu, 23 May 2013 01:22:55 GMT

I inserted a Lone Wolf 40 to 9 barrel in my G27. I saw a video on YouTube where the person said the barrel was cut in such a way that it was not necessary to change the extractor.

I went down to day and picked up a G26 extractor. When I got it home I noticed that it was a used one. The store is 65 miles away so I am reluctant on taking it back. Maybe I will just call them and tell them I am slightly dissatisfied.

Should I be concerned? Should I just used a G27 extractor in this set up?

What say U?

Reactive targets

CAcop — Thu, 23 May 2013 01:12:51 GMT

Looking for ideas for reactive targets.

I am mostly looking for stuff that is off the ground and is relatively cheap.

This is something that I will be taking to our indoor range at work which means it will run the risk of getting destroyed because someone "borrows" it.

Glock 19 fde

schief — Thu, 23 May 2013 01:08:26 GMT

went to local gunstore last week and bought a 19 gen 3 FDE. went back today and they had gotten in a 21gen 4 in FDE. bought it. picture of 19. will post 21 later

Attached Thumbnails

Pat McNamara 2-Day T.A.P.S. Pistol - June 15-16, 2013 - Los Angeles, CA

Alias_Training — Thu, 23 May 2013 01:00:51 GMT

Pat McNamara 2-Day T.A.P.S. Pistol - June 15-16, 2013 - Los Angeles, CA

TMACS
www.tmacsinc.com

Pat McNamara (Mac) has 22 years of Special Operations experience, 13 of which were in 1st SFOD-D. He has extensive experience in hostile fire/combat zones in the Middle East, and Eastern Europe. He trains individuals at basic and advanced levels of marksmanship and combat tactics.

When he worked in the premier special missions unit, he became an impeccable marksman, shooting with accurate, lethal results and tactical effectiveness. McNamara has trained tactical applications of shooting to people of all levels of marksmanship, from varsity level soldiers, and police officers who work the streets to civilians with little to no time behind the trigger.

His military experience quickly taught him that there is more to tactical marksmanship than merely squeezing the trigger. Utilizing his years of experience, McNamara developed a training methodology that is safe, effective and combat relevant and encourages a continuous thought process. This methodology teaches how to maintain safety at all times and choose targets that force accountability, as well as provides courses covering several categories, including individual, collective, on line and standards.
While serving as his Unit's Marksmanship NCO, he developed his own marksmanship club with NRA, CMP, and USPSA affiliations. Mac ran monthly IPSC matches and ran semi annual military marksmanship championships to encourage marksmanship fundamentals and competitiveness throughout the Army.

He retired from the Army's premier hostage rescue unit as a Sergeant Major and is the author of T.A.P.S. (Tactical Application of Practical Shooting).

Alias Training & Security Services
www.aliastraining.com

2-Day Tactical Application of Practical Shooting (TAPS)

Course Overview:
Tactical shooting requires agile and adaptive thinkers able to handle the challenges of full spectrum operations in an era of persistent conflict. To meet this requirement, TAPS delivers a comprehensive, systematic, progressive Train-the-Trainer shooting program focused on fundamental mastery and built for Law Enforcement officers, military personal, and qualified civilians. Designed for leaders and trainers, the TAPS course also applies to the patrol-level officer, basic level Soldiers, and civilian self & home defense minded shooters. The approach to instruction is through coaching and mentorship and both demonstrates and transfers a training method that is safe, effective, combat relevant, and encourages a continuous thought process that demands accountability.

Training is conducted on the range and focuses on advanced refinement of the basic fundamentals of marksmanship as applied to the primary and secondary weapons systems. Utilizing a building block learning model, TAPS combines the pressures and dynamics of competitive shooting and tactical application. While course of instruction is on the firing range, the TAPS training approach also translates into training venues outside the range.

Course Outline:
The 2-day course offering provides the following training and instruction:
- Lecture on proper weapons handling and safety
- Refresh the fundamentals and grouping exercises
- Conduct a diagnostic course of fire
- Conduct a discussion on the importance of performing a focal shift during training and avoiding mundane drills that do not encourage a thought process
- Other topics covered and practiced are; grouping exercises with both primary and secondary weapon systems, target discrimination, use of barricades, movement, close quarter battle techniques, immediate action drills, ballistics 101, transitions, magazine changes
- Escalation of training and intensity will vary depending on number of students and their skill level though the core of the course will always remain the same
- This course is marksmanship intensive.

Instructor: Patrick McNamara (AKA - "Mac")

Class dates: June 15-16, 2013

Cost: $525

Location: Chino, CA
Prado Olympic Shooting Park
17501 Pomona Rincon Rd
Chino, CA 91708

Weapon & Gear Class Requirements:
- Handgun
- Minimum of 3 pistol magazines
- Serviceable holster
- Minimum 2 pistol magazine pouches
- Eye and ear protection
- Suitable range wear depending on the season
- Weapon cleaning & lubrication supplies
- Good attitude

Ammo Requirements:
1000 rounds of handgun - Max / 600 rounds Min

If you are interested in attending this class please use this link to the Alias Training sign-up page:
http://aliastraining.com/patmcnamara...angelesca.aspx

If you have any additional questions please feel free to contact me;
Paul@aliastraining.com

***IF YOU CANNOT FIND REASONABLY PRICED AMMO FOR THE CLASS PLEASE EMAIL ME DIRECTLY AT Paul@aliastraining.com. WE HAVE SEVERAL VENDORS LINED UP TO SUPPLY AMMO TO OUR STUDENTS.***

Replacing T sights in MMC nightsights

randrew379 — Thu, 23 May 2013 00:52:10 GMT

Bought the sights from Dillon back in the 90s. I like the sights, but the inserts were crap from the start.
Seems I'll need to enlarge the holes to replace. Should I take this to a smith or is it something that's relatively simple to DIY?
Any suggestions appreciated.
posted using Outdoor Hub Campfire

Tarnish on leather/bullets, and rust on revolver.

Teecher45 — Thu, 23 May 2013 00:50:58 GMT

Hi guys and gals, I am the lucky receipient of a Colt Python .357. It was my uncles and he passed and left his truck, Jeep, and revolver to his son. His son could not get down to pick them up, so I ended-up with them. The gun is great, shoots good. It has 2 small spots of rust on it. It's stainless, what would be good to try to get rid of the rust?
Also, it came in a leather holster and belt that has ammo loops sewn into it. The ammo loops has ammo in them and the ammo and leather around the ammo has a green growth on them. Is there anything made I can clean the leather and ammo with?
Thanks :wavey:

Muslims form city-state in upstate New York

Snowman92D — Thu, 23 May 2013 00:38:32 GMT

Complete with formalized government machinery. Obama's policies have really emboldened these people:

http://lawenforcementtoday.com/tag/hancock-ny/

You'd like to think that they only want to skirt U.S. tax laws for a gaming casino...but it doesn't appear that they're trying to build a resort area of any kind. Allahu Akbar.

What do think it means

sarge1 — Thu, 23 May 2013 00:37:12 GMT

When your dogs bow when they come to see you?

...so God made a liberal

Snowman92D — Thu, 23 May 2013 00:17:09 GMT

For all you benighted Morlocks...

So God Made A Liberal... - YouTube

Who Else Has Done This?

fusegsp — Thu, 23 May 2013 00:14:23 GMT

Two days ago I was flashed repeatedly by a 60 year old fat lady, while I helped her look for her four missing peacocks during a tornado warning. That sentence is ridiculous and absolutely true. Country living.:dunno:

U.S. Admits for First Time Drones Killed 4 Americans

TBO — Wed, 22 May 2013 23:50:22 GMT

U.S. Admits for First Time Drones Killed 4 Americans

http://www.nytimes.com/2013/05/23/us...%2Findex.jsonp
-----------------------

They only meant to kill one of them.

Interesting day at the range yesterday

Vigilant — Wed, 22 May 2013 23:48:08 GMT

Yesterday was Range Day for annual recert. I usually score a 98 or 99 with the Smif Fotie, but had a bit of a mishap this time around. I haven't shot an M&P or messed with a retention holster since last year's recert, unfortunately. On top of me being a bit rusty, we shot in the pouring rain, and I fumbled a bit with the retention hood on one sequence. The Rangemaster took 2 rounds, or a possible four points. I was pretty bummed out, knowing that the best I could do was a 96, but was bound and determined to get it. Wellll....... about two sequences later, the jackass in the lane to my right put a round into my target. I finished the course, and when they graded me..... I made a 97 out of a possible 96! :rofl:

Beretta 92 Type M single stack 9mm

brianfede — Wed, 22 May 2013 23:39:48 GMT

Anyone have one? Tell me about the gun, especially the grip size ergo's versus the 92fs double stack. What are these selling for?

I love the look of the Beretta but hate the grip, I have this urge to buy a type M single stack.

Thoughts.....

Your favorite fast food joint?

Rabbi — Wed, 22 May 2013 23:37:44 GMT

I understand a lot of people don't like any of them. I get that. This thread is not for you if that is the case.

For everyone else...

What is your favorite fast food joint and why? Preferably a chain. If it is a local or regional chain, try and include a link if you would.

Gen4 21 with TLR-1s

MissoulaZ28 — Wed, 22 May 2013 23:14:21 GMT

What are people using for a holster with a G21 and TLR-1s light?

Sen. Cruz: "I don't trust Republicans"

JFrame — Wed, 22 May 2013 22:59:04 GMT

You gotta love this guy's guts! :cool:

Of course, Cruz is referring to RINOs...

Maybe -- just maybe -- with enough guys like Ted Cruz, we really COULD change the culture of Washington...

http://thehill.com/video/senate/3013...st-republicans

.

Car ?s for the GT braintrust:

Fiery Red XIII — Wed, 22 May 2013 22:58:53 GMT

The Dodge Stealth finally crapped out (I will miss that car!!!). I am not a Chevy guy, but found what may be a great deal... Looking at a 1993 (yes I know it's old) GMC Silverado 2500 (3/4-ton, Regular cab/bed) with the 5.7L V8. Runs good, topper, AC is out...new U-joints in the last year, new battery, new tires, 99K miles. Minimal rust. $1200.....is this an ok risk/deal? How can I tell if it has xtra features like a tow package (it IS 2wd only)? Anyone with info on the engines/transmissions in these cars? What can I expect for MPG? Is the 1993 R12or R134 for AC coolant?

Thanks! :wavey:

Red :cowboy:

New here from NC

pbfd2001 — Wed, 22 May 2013 22:55:01 GMT

I'm New On Here & I Just Bought My Very 1St Glock 30SF. Can't Wait To Get Another 1. Quick Question Will The Parts For A 30 Work On My 30SF?

Little Caesars Deep Dish- Surprisingly Edible!

GLWyandotte — Wed, 22 May 2013 22:42:23 GMT

I wouldn't't call it a deep dish per se. More like Sicilian. Crunchy bottom, pillowy soft, thick and chewy middle; light sauce and cheese. I haven't had a Sicilian pie in years and this brought back memories. Pretty good!

New Glock Owner from Eastern NC

Condition1 G29 — Wed, 22 May 2013 22:40:39 GMT

Hello members,

Just got myself a beautiful Glock 29 last week and I love it. Went to the gun show Sunday and bought 100 rounds of cheap hollow point ammo (PPU) so I can't wait to go shooting.

In the picture, one magazine has the Pearce +2 mag extension for G29/30 glocks. The bullets in the picture are Hornady hollow points. Inside the trigger guard is a weaponized kiradashi I bought at a gun show from a NC knife maker.

Just back...

BierGut — Wed, 22 May 2013 22:39:53 GMT

Passed on 4 until we saw this puppy. Like they say... it's better to be lucky than good.

Testing...the waters for acronyms.

RimShot — Wed, 22 May 2013 22:21:28 GMT

On my first visit here, I found the "Common (and not so common) GT Acronyms" thread to be very helpful. However, I did come across several other acronyms that were not mentioned.

Since the thread is locked, I can't add an entry.
At the moment, only one's coming to mind...anyone have any others they'd like to see added?

RSA = Recoil Spring Assembly

My son wants to start investing, but how?

jame — Wed, 22 May 2013 22:21:18 GMT

I know education is first, and he's already of hot pursuit of that elusive degree. He's paying for school as he goes, and carries very small debt that is well managed.

But he works hard, and has some extra cash on any given month. He's been told by some that he needed a minimum of 5 grand to get started, but I know there has to be some out there that will take $100 to $500 at a time.

We're talking mutual funds, here. All eggs in one basket is a big no no.

Any suggestions?